020 8320 3350

Soot Remover Powder

Removes unburned carbon slag deposits from:- Boiler furnaces, superheaters, economisers, air heaters and exhaust path/stacks.

Product Description

DESCRIPTION
Active blend of mineral based salts, containing slag modifiers and carbon oxidation catalyst.

APPLICATIONS
To remove unburned carbon slag deposits from:- Boiler furnaces, superheaters, economisers, air heaters and exhaust path/stacks.

ADVANTAGES
Reduces soot and slag deposits by transforming them into dry, powdery ashes which are easily removed.
Reduces cold end corrosion by neutralizing sulphuric acid deposits on surfaces where the temperature is lower than the dew point of the exhaust gas.
Improves heat transfer and aids soot blowing due to reduction in deposits.
Increases boiler efficiency. A 1mm deposit is equivalent to a 10% efficiency loss. 3mm deposit can reduce efficiency by up to 50%.
Reduces cleaning costs by decreasing maintenance and frequency of cleaning.
No need to shut down boiler or plant when dosing.

DIRECTIONS FOR USE
Determine the quantity of SOOT REMOVER POWDER required by quantity of fuel consumed per boiler per day.

See PRODUCT DOSE:

Introduce the appropriate amount of SOOT REMOVER POWDER into the hottest part of the boiler furnace by adopting any of the following methods:

1. Open a boiler peephole or furnace door and introduce the required amount of powder preferably with a blower, ensuring that the powder is spread through the flame path towards the back of the combustion chamber.
2. Remove the burner and shoot the required amount of powder through the body of the burner housing into the furnace and replace the burner.
3. If the boiler is equipped with dosing injector simply pour the powder into the injectors and direct the nozzle towards the hottest area of the flame.

PRODUCT DOSE

For Oil-fired boilers, the daily dosage depends on the fuel oil consumption per boiler, per day (see table).
For coal-fired boilers, the approximate daily dosage is 3kg of SOOT REMOVER POWDER per 30 tonnes of coal consumed per boiler every 24 hours.

Note: for best results apply SOOT REMOVER POWDER daily, immediately after soot blowing.

Oil consumption Tonnes/Day
20
40
60
80
100
120
140
160
180

Dosage KG (POWDER)
1-3
2-4
4-5
6
9
12
14
16
18

PACKAGING

IN POWDER: normal size 25kg bags

<< return to products