Transport 400 is a highly effective product for deep cleaning removing scale and rust stains from paint and metal work.
A mild efficient product for the deep cleaning of transport vehicles. Removes scale and heavy deposits including rust stains from paint and metal work. Leaves a passivating film on steel which protects against re-rusting. May also be used to clean and brighten aluminium vehicles..
DIRECTIONS FOR USE
RUST/ SCALE REMOVER – Use NEAT or for lighter duty application dilute 1 in 4 with water depending on the amount of soiling. Apply by brush or spray and allow to soak for approximately 10 minutes. Agitate surface with a stiff brush. Where possible rinse off using pressure washer and clean water. Some very heavy deposits may require a final brush or rinsing for total removal.
RESTORATION OF GLAZED SURFACES, TOILETS, BATHS, BASINS, CONCRETE AND TERRAZZO – Ingrained dirt, calcium, magnesium and limescale deposits, rust and uric acid stains can be quickly removed. Use at a dilution of 20%(2 parts in 10 with water). First clean the surface to remove superficial dirt and grease. Apply the solution by mop, brush or sponge and allow to soak for at least 10 minutes. For best results agitate the surface at the same time. Finally rinse the surface thoroughly with cold water.
Take normal precautions for handling acids. Do not mix with bleach or any products containing hypochlorite. For more detailed health and safety information request a hazard data sheet.
5, 25 or 205 litre drums.
Phosphoric Acid based cleaner & Descaler.
Solubilty: Fully miscible with water.
Boiling Point: > 100 Deg C
Specific Gravity: 1.12
pH = 1