Brake Cleaner
A high performance blend of solvents for the quick and effective removal of lining dust, brake fluid, oil, grease and dirt from brake and clutch systems. It frees off seized components and reduces brake squeal. It is also effective in cleaning electrical components, motors and switches. Performance Brake Cleaner is specially formulated to evaporate quickly in order not to delay reassembly. Component surfaces are left clean and dry.
DIRECTIONS FOR USE.
Shake can well. Spray liberally over brake or clutch mechanism and allow to dry. Catch residue with a cloth or paper towel. Allow to evaporate fully.
IMPORTANT always test brakes thoroughly after cleaning.
If using on electrical equipment, isolate before use and leave switched off for at least 30 minutes, allowing adequate ventilation for evaporation. Safe on all metals.
HEALTH AND SAFETY:
Use in a well ventilated area and avoid excessive skin contact. Small spillages will soon evaporate in well ventilated areas. Pressurised container. Protect from sunlight and do not expose to temperatures exceeding 500 C. Do not pierce or burn even after use. Do not spray onto naked flame or any incandescent material.
Available in 500ml aerosol sprays and in bulk as - 5L / 25L / 205L
A high performance blend of solvents for the quick and effective removal of lining dust, brake fluid, oil, grease and dirt from brake and clutch systems. It frees off seized components and reduces brake squeal. It is also effective in cleaning electrical components, motors and switches. Performance Brake Cleaner is specially formulated to evaporate quickly in order not to delay reassembly. Component surfaces are left clean and dry.
DIRECTIONS FOR USE.
Shake can well. Spray liberally over brake or clutch mechanism and allow to dry. Catch residue with a cloth or paper towel. Allow to evaporate fully.
IMPORTANT always test brakes thoroughly after cleaning.
If using on electrical equipment, isolate before use and leave switched off for at least 30 minutes, allowing adequate ventilation for evaporation. Safe on all metals.
HEALTH AND SAFETY:
Use in a well ventilated area and avoid excessive skin contact. Small spillages will soon evaporate in well ventilated areas. Pressurised container. Protect from sunlight and do not expose to temperatures exceeding 500 C. Do not pierce or burn even after use. Do not spray onto naked flame or any incandescent material.
Available in 500ml aerosol sprays and in bulk as - 5L / 25L / 205L
A high performance blend of solvents for the quick and effective removal of lining dust, brake fluid, oil, grease and dirt from brake and clutch systems. It frees off seized components and reduces brake squeal. It is also effective in cleaning electrical components, motors and switches. Performance Brake Cleaner is specially formulated to evaporate quickly in order not to delay reassembly. Component surfaces are left clean and dry.
DIRECTIONS FOR USE.
Shake can well. Spray liberally over brake or clutch mechanism and allow to dry. Catch residue with a cloth or paper towel. Allow to evaporate fully.
IMPORTANT always test brakes thoroughly after cleaning.
If using on electrical equipment, isolate before use and leave switched off for at least 30 minutes, allowing adequate ventilation for evaporation. Safe on all metals.
HEALTH AND SAFETY:
Use in a well ventilated area and avoid excessive skin contact. Small spillages will soon evaporate in well ventilated areas. Pressurised container. Protect from sunlight and do not expose to temperatures exceeding 500 C. Do not pierce or burn even after use. Do not spray onto naked flame or any incandescent material.
Available in 500ml aerosol sprays and in bulk as - 5L / 25L / 205L