Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
PERFORMANCE CITROSOLVE - CHEWING GUM
AND ADHESIVE RESIDUE REMOVER
COMPOSITION
Citrosolve principally consists of a naturally derived, biodegradable solvent obtained
from citrus peel. The product is a colourless/yellow clear liquid with a citrus odour.
Citrosolve successfully replaces Chewing Gum removers based on ozone depleting
products.
APPLICATIONS
Citrosolve can be used to remove chewing gum from floors, walls and seat covers
etc. The product is also effective at removing adhesive residues (from posters/selfadhesive labels) and footwear scuff marks.
Citrosolve will not degrade metal, wooden or concrete surfaces. Care should be
taken when used on rubber, plastic or painted surfaces. To prevent damage to these
surfaces, avoid prolonged contact, and wash surfaces after use.
Successful trials have been carried out with Citrosolve when used on concrete and
rubber floorings and when used to remove chewing gum and adhesive residues from
metal surfaces of vehicles.
METHOD OF USE
Always trial a test patch before extensive use on any surface. It is suggested that the
user removes as much chewing gum/adhesive as possible with a plastic scraper and
then uses Citrosolve to remove the remainder. Apply by cloth, cotton swab, paper
towel or spray. Wash surfaces after use to remove any solvent residue.
For glue / adhesive and rubber marks spray or wipe on with a cloth, rub gently, then
wipe / rinse off.
SAFETY PRECAUTIONS
Citrosolve has a flashpoint of 490C and is classified as flammable. Store away from
sources of heat or naked flames. Do not smoke when using Citrosolve. Avoid
breathing mists or sprays. Use in a well ventilated area. Avoid contact with skin or
eyes. Wear suitable protective clothing. If inadvertent skin or eye contact should
occur, wash/irrigate immediately with plenty of water. For detailed health and safety
information, request a hazard data sheet.
PACKAGING
5 litre drums and 750ml trigger sprays.
PERFORMANCE CITROSOLVE - CHEWING GUM
AND ADHESIVE RESIDUE REMOVER
COMPOSITION
Citrosolve principally consists of a naturally derived, biodegradable solvent obtained
from citrus peel. The product is a colourless/yellow clear liquid with a citrus odour.
Citrosolve successfully replaces Chewing Gum removers based on ozone depleting
products.
APPLICATIONS
Citrosolve can be used to remove chewing gum from floors, walls and seat covers
etc. The product is also effective at removing adhesive residues (from posters/selfadhesive labels) and footwear scuff marks.
Citrosolve will not degrade metal, wooden or concrete surfaces. Care should be
taken when used on rubber, plastic or painted surfaces. To prevent damage to these
surfaces, avoid prolonged contact, and wash surfaces after use.
Successful trials have been carried out with Citrosolve when used on concrete and
rubber floorings and when used to remove chewing gum and adhesive residues from
metal surfaces of vehicles.
METHOD OF USE
Always trial a test patch before extensive use on any surface. It is suggested that the
user removes as much chewing gum/adhesive as possible with a plastic scraper and
then uses Citrosolve to remove the remainder. Apply by cloth, cotton swab, paper
towel or spray. Wash surfaces after use to remove any solvent residue.
For glue / adhesive and rubber marks spray or wipe on with a cloth, rub gently, then
wipe / rinse off.
SAFETY PRECAUTIONS
Citrosolve has a flashpoint of 490C and is classified as flammable. Store away from
sources of heat or naked flames. Do not smoke when using Citrosolve. Avoid
breathing mists or sprays. Use in a well ventilated area. Avoid contact with skin or
eyes. Wear suitable protective clothing. If inadvertent skin or eye contact should
occur, wash/irrigate immediately with plenty of water. For detailed health and safety
information, request a hazard data sheet.
PACKAGING
5 litre drums and 750ml trigger sprays.