PES 30
PES30 is a concentrated blend of hydrocarbon solvents and detergents. The solvents will rapidly
penetrate and dissolve oil and grease deposits whilst the detergents enable emulsification and rinsing
with water. When rinsed with water, a white emulsion is formed which washes residues away easily.
The product leaves a fine residual oil film which provides temporary rust protection for ferrous metals.
PES30 is formulated for use in soak tanks, it requires no heating and has a long bath life. The product may also be used by brush, swab or non-misting spray and finds widespread application for cleaning oil, grease and metal working compounds from engine components, machinery, plant, vehicles, chassis etc.
PES30 may be used as supplied or diluted with 6-8 parts of commercial paraffin or similar solvent. PES30 is suitable for use on all metals, glass, enamel, stone, concrete and painted surfaces. Care should be taken however with certain plastic and rubber materials, tarmac and asphalt, as these will be adversely affected.
DIRECTIONS FOR USE:
Use PES30 as supplied or diluted with 6-8 parts of commercial paraffin. Apply by brush, mop or spray
unit or use in a soak tank (mild, galvanised and stainless steel tanks are satisfactory). Allow PES30 to
penetrate grease and oil for 10-20 minutes. Agitate or brush stubborn soils. Remove and pressure rinse with water. Where a slightly oily finish is acceptable water rinsing may be unnecessary.
SAFETY PRECAUTIONS:
Keep away from naked flames.
Do not take by mouth or inhale spray mists.
Avoid eye and skin contact by wearing protective goggles and clothing.
For detailed health and safety information request a hazard data sheet.
PACKAGING: 25 and 205 litre drums