Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
SEDIMENT REMOVER
Product Description
Colourless to pale yellow liquid compound for the removal of
sediment.
Directions for Use.
Continued use of Sediment Remover prevents the deposition of sediments,
mud or silt in ballast tanks, cooling water systems, pipelines etc.. Further, it
can be used with mechanical action to dislodge existing mud or silt in ballast
tanks. Sediment Remover should be injected in small quantities into ballast or
cooling water systems prior to filling the tanks or system. Mud present will not
adhere to either itself or to bulkheads, tank structures or inside pipelines. If
heavy deposits are present, an increased dosage will remove a portion of the
sediment after each application. Thick mud deposits will require several
applications.
Dosage
ONE litre of Sediment Remover per each 10tonnes of Ballast Water.
ONE litre of Sediment Remover per each 10tonnes of Cooling Water.
For the removal of existing accumulations increase the dosage by 2-3 times
depending on the ballast time available and the quantity of mud to be removed.
Mechanical agitation may be required. Essentially dosage above is given as a
guide. Dose largely depends on dry solids content. Sediment Remover should be
dosed at approx 4 to 20lit per tonne dry solids (0.5 to 2% of dry solids content).
Application.
Inject Sediment Remover preferably into the suction line of the ballast or
cooling water pump to ensure thorough mixing with the incoming water. If
possible, circulate the water through the tanks and the suspended mud and silt
will be pumped out when de-ballasting.
Physical Properties
Clear to pale yellow liquid
Specific Gravity: 1.06 @ 20'C
pH: 8.5Features & Benefits
* A highly effective liquid
compound for the removal of
sediments, silt and mud from
ballast tanks, cooling water
systems, pipelines.
* Sediment Remover will keep mud
in suspension and will clean fouled
systems completely provided the
appropriate dosage levels and
application times are adhered to.
* Sediment Remover is a Polymer
based product. It does not contain
acid, alkali or solvent. Sediment
Remover is completely
biodegradable and has no hazard
indications.
SEDIMENT REMOVER
Product Description
Colourless to pale yellow liquid compound for the removal of
sediment.
Directions for Use.
Continued use of Sediment Remover prevents the deposition of sediments,
mud or silt in ballast tanks, cooling water systems, pipelines etc.. Further, it
can be used with mechanical action to dislodge existing mud or silt in ballast
tanks. Sediment Remover should be injected in small quantities into ballast or
cooling water systems prior to filling the tanks or system. Mud present will not
adhere to either itself or to bulkheads, tank structures or inside pipelines. If
heavy deposits are present, an increased dosage will remove a portion of the
sediment after each application. Thick mud deposits will require several
applications.
Dosage
ONE litre of Sediment Remover per each 10tonnes of Ballast Water.
ONE litre of Sediment Remover per each 10tonnes of Cooling Water.
For the removal of existing accumulations increase the dosage by 2-3 times
depending on the ballast time available and the quantity of mud to be removed.
Mechanical agitation may be required. Essentially dosage above is given as a
guide. Dose largely depends on dry solids content. Sediment Remover should be
dosed at approx 4 to 20lit per tonne dry solids (0.5 to 2% of dry solids content).
Application.
Inject Sediment Remover preferably into the suction line of the ballast or
cooling water pump to ensure thorough mixing with the incoming water. If
possible, circulate the water through the tanks and the suspended mud and silt
will be pumped out when de-ballasting.
Physical Properties
Clear to pale yellow liquid
Specific Gravity: 1.06 @ 20'C
pH: 8.5Features & Benefits
* A highly effective liquid
compound for the removal of
sediments, silt and mud from
ballast tanks, cooling water
systems, pipelines.
* Sediment Remover will keep mud
in suspension and will clean fouled
systems completely provided the
appropriate dosage levels and
application times are adhered to.
* Sediment Remover is a Polymer
based product. It does not contain
acid, alkali or solvent. Sediment
Remover is completely
biodegradable and has no hazard
indications.